Deep Clean Your Fuel System

In today’s Marshalls Automotive auto post, we’re talking about fuel system cleaning. The first thing to know is how vital it is to have a clean fuel system. Redmond drivers need fuel to go, and the cleaner the fuel system, the more efficiently the fuel will burn. That means more power and better fuel efficiency.

A clean fuel system saves money for Redmond drivers at Oregon gas stations. We guess you could say, it all starts and ends at the pump. One of the most important things Redmond auto owners can do to keep their vehicle fuel system clean is to buy good quality gas. Major brands have detergents that keep gum and varnish from rapidly building up in the fuel system.

So buying cheaper gas in Oregon can actually be more costly for Redmond car owners in the long run. Now, most cars on Oregon freeways are more than five or six years old. That means they’ve had time for some dirt and rust to start accumulating in the fuel tank. This junk needs to be filtered out of the fuel before it hits your vehicle engine. That’s the fuel filter’s job.

When the fuel filter is clogged, the dirty fuel will bypass the filter and go on up to the engine where it can clog fuel injectors and get into the cylinders. That could be detrimental. So Redmond car owners should have their fuel filter changed when recommended. Check your owner’s manual or ask your honest Marshalls Automotive technician if your fuel filter is due for replacement.

The fuel then goes up into the throttle body. This is another area where varnish and gum can accumulate. A professional fuel system cleaning at Marshalls Automotive in Redmond will use a combination of special cleaning chemicals and old fashioned swabbing to clean out the throttle body. Now, the fuel injectors are the last stop in the fuel delivery system.

It’s essential for Redmond car owners to keep those fuel injectors clean. The fuel injectors need to deliver a precise amount of fuel, at exactly the right time, in a particular spray pattern. They just can’t do that if they’re dirty. Dirty fuel injectors really rob power and hurt fuel economy.

It is important for the fuel system proper, but there are a couple other things that will help keep your vehicle engine clean as well. Of course, air is mixed with the fuel before it’s burned. Dirty air means dirt gets into your engine, so you need to replace your engine air filter when it’s dirty.

The PCV value routes unburned fuel that escapes into the lower engine back up into the intake system to be burned. A sticky PCV valve needs to be replaced at Marshalls Automotive to make sure that system is working properly for Redmond auto owners and the breather filter needs to be replaced if it’s dirty as well.

Do all these things and your vehicle engine’s air and fuel will be as clean as possible. You’ll get much better MPG and better power.